Valve stem height in 906 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Valve stem height in 906

Print Thread

Valve stem height in 906 #1362495 12/31/12 09:34 PM 12/31/12 09:34 PM
Joined: Mar 2003 Posts: 4,931 Tri-Cities, Washington V VITC_GTX OP master
VITC_GTX OP master V Joined: Mar 2003 Posts: 4,931 Tri-Cities, Washington	What is the valve stem height supposed to be for 906 heads? The FSM says to use tool #XXX to measure it but doesn't say what the measurement is or the tolerances are.

Entire Thread
Subject	Posted By	Posted
Valve stem height in 906	VITC_GTX	01/01/13 01:34 AM
Re: Valve stem height in 906	MLR426	01/01/13 04:14 PM
Re: Valve stem height in 906	VITC_GTX	01/01/13 07:39 PM
Re: Valve stem height in 906	MLR426	01/02/13 02:41 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1