Quote:

Quote:

it might be leaking on the bottom side. I'd pull it & add a THIN/EVEN coat of Permatex #1 in the toothpaste like tube to both sides of the 8 valley pan ports


the bottom is often over-looked cause you can't see it! out of sight, out of mind!




I chased a miss like this for a couple months.... I suggest you spray around with carb cleaner first (cheapest/easiest), inspect the carburetor (rebuild it if it's been sitting) and if those don't work, pull the intake.

Mine WAS leaking under the intake & I could see a little oil in the intake runners. Form-A-Gasket fixed mine.


70 Roadrunner convt. street car 440+6, NOS, 4-spd, SS springs '96 Mustang GT convt. street car '04 4.6 SOHC, NOS, auto, lowered "Officer, that button is for short on-ramps"