Quote:

need to use etching primer on bare metal...




For the best results use a epoxy sealer on the bare metal. You only need etching primer on aluminiumu. After using the sealer use a fast built primer. Ive never heard of "Max's) Most of the stuff in cans is real thin. After you have the primer on sand it with 320. Respray more primer where needed. When you are happy with the smooth primer shoot the car with a sealetr like velevet seal. wait for that to dry, go over it with fine scotchbrit to remove the nibs. Air blow and clean real good and spray away with your choice of color... Good luck.

I am truckless..