Well got to work removing the inner fenders and when I couldnt find any spot welds I started getting a little frustrated. That's when I looked and saw the whole piece had a bunch of weld beads holding it together. Somebody did some shotty ass work on this front end. They didnt even clamp the metal together tight when they welded it together.

So off to work I went with a pry bar and grinder


I dont know what to do with this piece above. It's obviously been taken off then rewelded on judging by the big gap in the metal. Guess I might have to remove it and put it on the right way? any insight on how. I'm pretty sure it's probably not in its stock location has the people who did the front end work on this car where hacks.

Also dont really know what to do about this yet. Someone hacked it up
the other side looks normal

Also attempted to straighten out the front of the frame rail. Got it more less where it needs to be. But I think I might just replace both sides about 6 inches back. Do they make replacement frame rails for the front?




Cleaned up the excess welds and metal.