Quote:

Depends on how it is bent, but the hood on my Charger was originally off a junkyard car and the hood was slightly buckled. The body shop welded tabs to the front underhood structure and bolted brackets to the hood hinge bolt holes and used the brackets to hook up a puller to pull the hood straight.




I've done something similar to this in the past. The problem is that you have to identify if there are any kinks and where they are. If you can't get them straightened out, the hood will tend to kink again at that spot. I ended up sectioning out a piece of the inner support and replacing it on mine.


"We live in a time when intelligent people are being silenced so that stupid people won't be offended".