Small block intake for magnum heads

Print Thread

Re: Small block intake for magnum heads [Re: Adobedude] #1326710 10/27/12 11:11 PM 10/27/12 11:11 PM
Joined: Oct 2003 Posts: 7,506 Az Crizila master
Crizila master Joined: Oct 2003 Posts: 7,506 Az	Quote: Only a couple choices out there without re drilling the Magnum heads. Going with a 950 HP...What would you guys run? Mopar 4bbl M1 or the Edlebrock Performer RPM Air Gap http://www.summitracing.com/parts/edl-7577 408 11.05:1 Max Ported Eddys 248/252 .576"/.584" 108 LSA+4 4K converter 3474 lbs with me in it Shift at 6800, trap at 6400. Had my magnums drilled to take magnum or LA bolt pattern and I run a Victor 340 Jr. (port matched ) with spacers. Running a 950 also. 7437877-blrmtr2.jpg (466 downloads) Fastest 300

Entire Thread
Subject	Posted By	Posted
Small block intake for magnum heads	Adobedude	10/27/12 03:15 AM
Re: Small block intake for magnum heads	moparacer	10/27/12 05:48 AM
Re: Small block intake for magnum heads	w7smallblock	10/27/12 05:59 AM
Re: Small block intake for magnum heads	Adobedude	10/27/12 02:22 PM
Re: Small block intake for magnum heads	BPE	10/27/12 02:37 PM
Re: Small block intake for magnum heads	Adobedude	10/27/12 02:53 PM
Re: Small block intake for magnum heads	moparacer	10/27/12 03:26 PM
Re: Small block intake for magnum heads	Adobedude	10/27/12 11:34 PM
Re: Small block intake for magnum heads	Crizila	10/28/12 03:11 AM
Re: Small block intake for magnum heads	Crizila	10/28/12 03:13 AM

Hop To