Quote: Invest in Line wrenches (flare nut wrench). They are more closed at the end so it will slip over the line.
One of my coworker told me to get some a couple weeks ago. I guess I should have. It seems my friend is on board with doing the entire brake system next weekend.
That side wheel cylinder does not appear to be leaking. Please take some pictures with a real camera so we can see the thickness of the brake shoe lining material. Get a fine marked steel ruler and measure the thinnest section of material on each shoe.
I don't see that you rear wheel cylinders are leaking. Carefully take a dull screwdriver and pull the dust boot from the wheel cylinder back. Then look to see if any fluid runs out.
STOP and go to other side and inspect the wheel clyinder and take picture of that side.
If both sides are not leaking and the brake shoe lining material is ok, just change the master cylinder for now.
