Cylinder wall thickness?? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Cylinder wall thickness??

Print Thread

Cylinder wall thickness?? #1306564 09/18/12 08:08 PM 09/18/12 08:08 PM
Joined: Jan 2003 Posts: 426 Ransom Canyon, Texas M Madness OP mopar
Madness OP mopar M Joined: Jan 2003 Posts: 426 Ransom Canyon, Texas	What is considered minimum for cylinder wall thickness on a 470 low deck stroker, no nitrious, 7.1" rod? I have a block that's betwen .133" & .153" on the minor thrust on #8 cycl. .157" on #2 minor thrust. .169" On #1 major thrust. Rest of block is .188" to .259"

Entire Thread
Subject	Posted By	Posted
Cylinder wall thickness??	Madness	09/19/12 12:08 AM
Re: Cylinder wall thickness??	Thumperdart	09/19/12 01:14 AM
Re: Cylinder wall thickness??	HPMike	09/19/12 02:59 AM
Re: Cylinder wall thickness??	64Post	09/19/12 03:21 AM
Re: Cylinder wall thickness??	Jwilli500	09/19/12 05:45 AM
Re: Cylinder wall thickness??	JohnRR	09/19/12 04:39 PM
Re: Cylinder wall thickness??	Madness	09/19/12 05:35 PM
Re: Cylinder wall thickness??	64Post	09/19/12 06:06 PM
Re: Cylinder wall thickness??	JohnRR	09/19/12 06:57 PM
Re: Cylinder wall thickness??	Cab_Burge	09/19/12 07:26 PM
Re: Cylinder wall thickness??	dogdays	09/19/12 08:12 PM
Re: Cylinder wall thickness??	Madness	09/20/12 09:14 PM
Re: Cylinder wall thickness??	64Post	09/20/12 10:29 PM
Re: Cylinder wall thickness??	dogdays	09/20/12 10:43 PM
Re: Cylinder wall thickness??	jafr	09/22/12 12:13 AM
Re: Cylinder wall thickness??	Cab_Burge	09/19/12 05:00 AM
Re: Cylinder wall thickness??	BradH	09/19/12 03:24 PM
Re: Cylinder wall thickness??	Thumperdart	09/19/12 04:32 PM
Re: Cylinder wall thickness??	BradH	09/19/12 06:03 PM
Re: Cylinder wall thickness??	Thumperdart	09/19/12 06:18 PM
Re: Cylinder wall thickness??	VernMotor	09/19/12 06:23 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1