bottom tin cover on intake small block

Print Thread

Re: bottom tin cover on intake small block [Re: GO_Fish] #1296238 09/04/12 07:27 AM 09/04/12 07:27 AM
Joined: Jul 2003 Posts: 6,167 Maryland GO_Fish master
GO_Fish master Joined: Jul 2003 Posts: 6,167 Maryland	Quote: Quote: Aluminimum intakes dont have those splash pans.. That's why they make these... Keeps hot oil from splashing off the cam onto the bottom of the intake, AND if you bend a pushrod, it helps keep oil pressure up by keeping the lifter in its bore so you have time to pull over and shut down without frying the engine. The one pictured above is made by Milodon and is sold by Summit Racing. I think their part number is 32610. Scott B. "I'm a self-made man... I started with nothing, and I still have most of it!" 68 360 rusty B'cuda 'vert (GO Fish)13.59@ 98.72 mph 69 340 GTS stock 14.18@ 95.60 mph 01 5.9L Ram 1500 Quad Cab 4x4 01 3.5L 300M 16.23@ 86.97 mph

Entire Thread
Subject	Posted By	Posted
bottom tin cover on intake small block	bnichols	09/03/12 06:42 PM
Re: bottom tin cover on intake small block	RapidRobert	09/03/12 08:18 PM
Re: bottom tin cover on intake small block	mikemee1331	09/03/12 08:33 PM
Re: bottom tin cover on intake small block	RapidRobert	09/03/12 08:35 PM
Re: bottom tin cover on intake small block	mikemee1331	09/03/12 08:48 PM
Re: bottom tin cover on intake small block	mr_340	09/03/12 10:55 PM
Re: bottom tin cover on intake small block	340SHORTY	09/03/12 11:34 PM
Re: bottom tin cover on intake small block	GO_Fish	09/04/12 01:41 AM
Re: bottom tin cover on intake small block	340SHORTY	09/04/12 02:48 AM
Re: bottom tin cover on intake small block	RapidRobert	09/04/12 04:01 AM
Re: bottom tin cover on intake small block	GO_Fish	09/04/12 11:27 AM

Hop To