Pentastar, It was really so simple that I figured pictures wouldnt be needed.

I'll explain: the brackets do use the same mounting boss, as was stated earlier in the post you must drill out the Buchellon bracket to 1/2" dia. hole. The other thing that must be done for an easy non binding fit is to just grind/ file a 1/2" radius into the buchellon bracket at the level of the cables metal sheath.

Here is the bracket unmodified you can see that the cables sheath will not let it aline square to the linkage



here is the simple fix 1/2" radius out of the side of the bracket


hope this helps. Henry