Difference between 10.5 and 11.0 cr

Print Thread

Re: Difference between 10.5 and 11.0 cr [Re: Wedgeman] #1283129 08/10/12 07:47 PM 08/10/12 07:47 PM
Joined: Jun 2003 Posts: 52,972 Romeo MI MR_P_BODY Master
MR_P_BODY Master Joined: Jun 2003 Posts: 52,972 Romeo MI	A difference in heads will be a factor also... alum heads may see a bigger benefit due to alum heads like more compression to equal out to iron

Entire Thread
Subject	Posted By	Posted
Difference between 10.5 and 11.0 cr	Wedgeman	08/10/12 09:35 PM
Re: Difference between 10.5 and 11.0 cr	Sport440	08/10/12 10:40 PM
Re: Difference between 10.5 and 11.0 cr	B3422W5	08/10/12 11:10 PM
Re: Difference between 10.5 and 11.0 cr	MR_P_BODY	08/10/12 11:47 PM
Re: Difference between 10.5 and 11.0 cr	BobR	08/11/12 12:02 AM
Re: Difference between 10.5 and 11.0 cr	440Jim	08/11/12 12:37 AM
Re: Difference between 10.5 and 11.0 cr	Wedgeman	08/11/12 02:09 AM
Re: Difference between 10.5 and 11.0 cr	MR_P_BODY	08/11/12 02:23 AM
Re: Difference between 10.5 and 11.0 cr	Dunnuck Racing	08/11/12 02:28 AM
Re: Difference between 10.5 and 11.0 cr	Sport440	08/11/12 08:31 AM
Re: Difference between 10.5 and 11.0 cr	Darryls-Demon	08/11/12 04:22 PM
Re: Difference between 10.5 and 11.0 cr	Wedgeman	08/11/12 08:53 PM
Re: Difference between 10.5 and 11.0 cr	BIGSPEED	08/11/12 10:20 PM
Re: Difference between 10.5 and 11.0 cr	Ian	08/12/12 02:19 AM
Re: Difference between 10.5 and 11.0 cr	MR_P_BODY	08/12/12 02:37 AM
Re: Difference between 10.5 and 11.0 cr	emarine01	08/12/12 02:55 AM
Re: Difference between 10.5 and 11.0 cr	Dunnuck Racing	08/12/12 04:14 AM
Re: Difference between 10.5 and 11.0 cr	Wedgeman	08/12/12 04:52 AM
Re: Difference between 10.5 and 11.0 cr	Wedgeman	08/12/12 03:51 PM
Re: Difference between 10.5 and 11.0 cr	radar	08/11/12 02:46 AM
Re: Difference between 10.5 and 11.0 cr	Darryls-Demon	08/11/12 03:40 AM
Re: Difference between 10.5 and 11.0 cr	Wedgeman	08/11/12 04:33 AM
Re: Difference between 10.5 and 11.0 cr	Dunnuck Racing	08/11/12 05:03 AM
Re: Difference between 10.5 and 11.0 cr	Wedgeman	08/11/12 06:15 AM
Re: Difference between 10.5 and 11.0 cr	polyspheric	08/11/12 03:52 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To