Ok, so I put all new plugs in and went through the cab again (cleaned everything over). Problem 1 = Car will not idle smooth bellow 1200 rpm, I turn the idle mixture screws in from 1 1/2 turns out all the way to tight and the car still runs???? but wont idle I thought the car was supposed to die with the idle screws all the way tight. #2 We turned the distributor a bit to try and make it run better(we have it set at 0 degrees TDC) and as soon as your touch the car (ground it??) it will run a little better? #3 there is steam coming from carburator like it is getting super hot. whats the deal? Thank you very much for any input, I cant believe this is such a headache