Stock SB Timing Cover thickness?

Print Thread

Re: Stock SB Timing Cover thickness? [Re: 408strokerdart] #1247574 06/09/12 09:05 AM 06/09/12 09:05 AM
Joined: Oct 2008 Posts: 458 Michigan BPE mopar
BPE mopar Joined: Oct 2008 Posts: 458 Michigan	I just went out out and measured a couple I have here. One is 2.486", the other one is 2.495". I also took a measurement of one on an assembled engine and got 2.522" but you would have to account for the compressed thickness of the .030" timing cover gasket. Hope this helps. Rod

Entire Thread
Subject	Posted By	Posted
Stock SB Timing Cover thickness?	408strokerdart	06/09/12 04:19 AM
Re: Stock SB Timing Cover thickness?	440W8 Duster	06/09/12 05:02 AM
Re: Stock SB Timing Cover thickness?	408strokerdart	06/09/12 05:08 AM
Re: Stock SB Timing Cover thickness?	BPE	06/09/12 01:05 PM
Re: Stock SB Timing Cover thickness?	408strokerdart	06/09/12 03:44 PM
Re: Stock SB Timing Cover thickness?	CompWedgeEngines	06/09/12 04:04 PM
Re: Stock SB Timing Cover thickness?	408strokerdart	06/10/12 04:56 AM

Hop To