drilling holes in piston - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer drilling holes in piston

Print Thread

drilling holes in piston #1246348 06/06/12 05:42 PM 06/06/12 05:42 PM
Joined: Mar 2003 Posts: 710 Harrisburg Pa. 17112 M moparmikethree OP super stock
moparmikethree OP super stock M Joined: Mar 2003 Posts: 710 Harrisburg Pa. 17112	when drilling holes in the top of the pistons at the top ring.(compression pushes the ring out for better sealing) What size drill bit, and do you drill down to the second ring also

Entire Thread
Subject	Posted By	Posted
drilling holes in piston	moparmikethree	06/06/12 09:42 PM
Re: drilling holes in piston	BradH	06/06/12 09:58 PM
Re: drilling holes in piston	340SHORTY	06/06/12 11:34 PM
Re: drilling holes in piston	StukaJU87	06/06/12 11:41 PM
Re: drilling holes in piston	StukaJU87	06/06/12 11:45 PM
Re: drilling holes in piston	slantzilla	06/07/12 12:14 AM
Re: drilling holes in piston	JohnRR	06/07/12 03:30 AM
Re: drilling holes in piston	Cab_Burge	06/07/12 04:27 AM
Re: drilling holes in piston	ehbody	06/07/12 07:38 PM
Re: drilling holes in piston	JohnRR	06/07/12 07:57 PM
Re: drilling holes in piston	71birdJ68	06/07/12 07:54 PM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1