Thanks guys for the answers and I hope I'm going to be OK.. The machine shop that installed the bushings drilled a large oil hole in then. They had the cam and the lifters before the install and our agreement was they were going to do a measurement for hole placement..

Unfortunately.. we never discussed what size hole and from my estimation.. it looks like .125 or bigger..

The lifters we're using are the ISKY EZ with pushrod oiling and the rockers are T&D individual shafts, as we had the rocker stands turned down..

We're still about 2 weeks away from final assembly and primer of the oiling system.. but unless someone flat out tells me its wrong and needs to be re-done, then we're going to go forward and watch how much oil comes out of there during the priming..