It's still not idling as smooth as I would expect, especially based on some other videos I've seen posted of 360's with this same cam. Also, I'm not understanding how/why it will idle the BEST with 30 degrees advance
You need to bring the RPM up and see what the timing is doing! If it keeps advancing you are going to have a huge problem when it tries to run with almost 60 degrees advance , nevermind when the vacuum can starts adding more ...
heres something dumb I didn't ask , can you see the springs on the advance weights when you look down inside the distributor ?
No kidding! Wouldn't that be something if the springs were both missing/broken
And Cal, I was in your same spot ~5 years ago. Used carb on a used intake, and it ran like poo Couldn't touch the throttle for 10 minutes while it warmed up, and it still drove like crap. Eventually I figured out each little issue, and it drives almost perfectly now. Keep at it
If you ever find yourself in a fair fight, your tactics suck.
Couldn't touch the throttle for 10 minutes while it warmed up, and it still drove like crap. Eventually I figured out each little issue, and it drives almost perfectly now. Keep at it 
