what roller rocker do i use for eddy heads

Print Thread

Re: what roller rocker do i use for eddy heads [Re: DaytonaTurbo] #1229428 05/08/12 04:13 PM 05/08/12 04:13 PM
Joined: Jan 2003 Posts: 5,912 Athens, Greece Pyper70 master
Pyper70 master Joined: Jan 2003 Posts: 5,912 Athens, Greece	Quote: What doesn't fit? Eddy rpm heads are supposed to take stock rockers. Stock rockers aren't adjustable though. I went through this two weeks ago with my build (RPM heads) the problem was even though my ductiles were shimmed properly to my 906s, the rocker itself was rubbing on the pedestal of the RPM heads. I use shims & spacers, not springs. I spent about 10 hours removing, installing, tightening over and over again until I noticed where the problem was. Went to my spare parts closet and pulled my Harland Sharp Rollers I had set aside (luckily I had them). I got them from Todd at Competition Wedge Racing. Fit like a glove. They do have to be setup for RPM heads though. I didnt have to shim anything....from the package, to the oil bath, to the heads. Put it altogether and dropped a bottle of zinc additive to the oil... Family owned 1969 Charger R/T DualQuad 440/727/GVO/3.55s

Entire Thread
Subject	Posted By	Posted
what roller rocker do i use for eddy heads	woody02	05/08/12 04:45 PM
Re: what roller rocker do i use for eddy heads	DaytonaTurbo	05/08/12 04:53 PM
Re: what roller rocker do i use for eddy heads	JohnRR	05/08/12 05:16 PM
Re: what roller rocker do i use for eddy heads	Pyper70	05/08/12 08:13 PM
Re: what roller rocker do i use for eddy heads	topside	05/08/12 08:58 PM
Re: what roller rocker do i use for eddy heads	noplanb	05/08/12 10:08 PM
Re: what roller rocker do i use for eddy heads	G_bob	05/09/12 12:48 AM
Re: what roller rocker do i use for eddy heads	RSNOMO	05/09/12 01:36 AM
Re: what roller rocker do i use for eddy heads	AndyF	05/09/12 01:41 AM
Re: what roller rocker do i use for eddy heads	DirectSubjection	05/09/12 01:54 AM
Re: what roller rocker do i use for eddy heads	ahy	05/09/12 02:16 AM
Re: what roller rocker do i use for eddy heads	GwaiiEagle	05/09/12 03:44 AM
Re: what roller rocker do i use for eddy heads	CompWedgeEngines	05/09/12 02:30 PM
Re: what roller rocker do i use for eddy heads	noplanb	05/09/12 05:47 PM
Re: what roller rocker do i use for eddy heads	woody02	05/09/12 06:24 PM
Re: what roller rocker do i use for eddy heads	maximum entropy	05/09/12 08:54 PM
Re: what roller rocker do i use for eddy heads	Todd	05/10/12 03:09 AM
Re: what roller rocker do i use for eddy heads	ahy	05/10/12 04:20 AM

Hop To