Lots of good advise here, Randy . I agree with Sean about opening up the feeo above the mains to 17/64" and doing the radius at the sharp 90 degree turn at the pick-up. Ask Shawn about grooving the cam journal or cam bearing for full time oiling up top to see if it is worth it for your application.
. I agree with Sean about opening up the feeo above the mains to 17/64" and doing the radius at the sharp 90 degree turn at the pick-up. Ask Shawn about grooving the cam journal or cam bearing for full time oiling up top to see if it is worth it for your application. 
