Motor is 365 ci with KB-107 slugs 10.75 Comp(est)180psi cyl Ported Eddys(flow app.275 cfm)Victor 340 intake,2" open spacer with a 750 holley/proform carb.The cam will be a hughes solid flat tappet htl 5665as (614/626 lift 256/260 dur @.050 103 intake centerline)Car is 3100# with the driver.Trans is a 904 with low 1st gear and a 3800 converter.Rear is a 8-3/4 with 410 gears and a 9x28 slick.Car has 3000# SS springs w/snubber.I footbrake and the car usually works well.What do you folks think it will do?