Using a 1977 440 in my 1966 - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Using a 1977 440 in my 1966

Print Thread

Re: Using a 1977 440 in my 1966 [Re: bschargerse] #1203716 03/28/12 02:47 AM 03/28/12 02:47 AM
Joined: Oct 2010 Posts: 18 Washington F fish59 OP member
fish59 OP member F Joined: Oct 2010 Posts: 18 Washington	I am using the 1977 block, pistons and crank shaft. I am using the edlebrock performer RPM cam, RPM intake and an edelbrock 750 carb. I have the 915 heads from the original 1966 big block that was in the car. The heads have had minor work done to them to update the valve seats. Does this sound like a good combination or would you still switch the cam?

Entire Thread
Subject	Posted By	Posted
Using a 1977 440 in my 1966	fish59	03/26/12 07:21 AM
Re: Using a 1977 440 in my 1966	Kern Dog	03/26/12 07:36 AM
Re: Using a 1977 440 in my 1966	LaRoy Engines	03/26/12 02:46 PM
Re: Using a 1977 440 in my 1966	fish59	03/26/12 02:54 PM
Re: Using a 1977 440 in my 1966	Mr.Yuck	03/26/12 02:59 PM
Re: Using a 1977 440 in my 1966	Reggie	03/26/12 04:04 PM
Re: Using a 1977 440 in my 1966	RapidRobert	03/26/12 04:11 PM
Re: Using a 1977 440 in my 1966	GrnMagic77	03/26/12 04:57 PM
Re: Using a 1977 440 in my 1966	DaytonaTurbo	03/27/12 06:04 AM
Re: Using a 1977 440 in my 1966	bschargerse	03/27/12 11:51 AM
Re: Using a 1977 440 in my 1966	Mr.Yuck	03/27/12 01:29 PM
Re: Using a 1977 440 in my 1966	DaytonaTurbo	03/27/12 07:42 PM
Re: Using a 1977 440 in my 1966	bschargerse	03/27/12 10:42 PM
Re: Using a 1977 440 in my 1966	fish59	03/28/12 06:47 AM
Re: Using a 1977 440 in my 1966	Kern Dog	03/28/12 06:58 AM
Re: Using a 1977 440 in my 1966	DaytonaTurbo	03/28/12 07:46 AM
Re: Using a 1977 440 in my 1966	340SHORTY	03/28/12 10:08 AM
Re: Using a 1977 440 in my 1966	Pleasureman	03/28/12 11:00 AM
Re: Using a 1977 440 in my 1966	quickd100	03/28/12 11:13 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1