roller pilot bearing too loose in end of crank-Help

Print Thread

Re: roller pilot bearing too loose in end of crank-Help [Re: chargers777] #1202666 03/24/12 07:45 PM 03/24/12 07:45 PM
Joined: Jan 2003 Posts: 26,011 Rio Linda, CA John_Kunkel Too Many Posts
John_Kunkel Too Many Posts Joined: Jan 2003 Posts: 26,011 Rio Linda, CA	Depending on how loose it is you might try "tattooing" it; go around the outer periphery with a bunch of center punch dimples to expand the diameter and then install it with red Loctite. The INTERNET, the MISinformation superhighway

Entire Thread
Subject	Posted By	Posted
roller pilot bearing too loose in end of crank-Help	chargers777	03/24/12 11:39 PM
Re: roller pilot bearing too loose in end of crank-Help	John_Kunkel	03/24/12 11:45 PM
Re: roller pilot bearing too loose in end of crank-Help	Stanton	03/25/12 12:41 AM
Re: roller pilot bearing too loose in end of crank-Help	chargers777	03/25/12 02:46 AM
Re: roller pilot bearing too loose in end of crank-Help	jamesc	03/25/12 03:27 AM
Re: roller pilot bearing too loose in end of crank-Help	chargers777	03/25/12 03:40 AM
Re: roller pilot bearing too loose in end of crank-Help	calrobb2000	03/25/12 05:49 AM
Re: roller pilot bearing too loose in end of crank-Help	radar	03/25/12 06:25 AM
Re: roller pilot bearing too loose in end of crank-Help	buildanother	03/25/12 06:30 AM
Re: roller pilot bearing too loose in end of crank-Help	chargers777	03/25/12 07:48 AM
Re: roller pilot bearing too loose in end of crank-Help	fourgearsavoy	03/25/12 01:26 PM

Hop To