Quote:

If it is an 8 3/4" and is original, it may have the small 1 3/8" pinion '741 case. TRY to get gears or a SG for THAT oddball!




Sure grip is interchangable for all 8-3/4s. Bearings for the SG are different between cone and clutch type but it's the ID that's different, they're the same as far as the case goes. I took one from a 741 and put it in a different case. Still have the case and gears from the 741, should probably scrap it.

Last edited by B_Body_Bob; 03/19/12 06:07 PM.

Everybody makes fun of a hillbilly until they need something fixed