Timing with vacuum advance

Print Thread

Re: Timing with vacuum advance [Re: 73rrak] #1192958 03/07/12 08:19 PM 03/07/12 08:19 PM
Joined: Nov 2011 Posts: 2,154 Its a TRAP! DARTH V8Я Oh No!! I just had a moron attack!
DARTH V8Я Oh No!! I just had a moron attack! Joined: Nov 2011 Posts: 2,154 Its a TRAP!	Quote: It's connected to the passenger side of the front metering block of my 800 Holley. Is this right or wrong ? Depending on the metering block, sometimes it ported vacuume, sometimes not. As suggested, just start the engine let it idle and see if theres suction at the port. If there is, maybe another source somewhere on the carb. When it takes more than a sweet mullet to prove you rule at the trailer park..

Entire Thread
Subject	Posted By	Posted
Timing with vacuum advance	73rrak	03/07/12 10:27 PM
Re: Timing with vacuum advance	05dakota	03/07/12 10:32 PM
Re: Timing with vacuum advance	jbc426	03/07/12 10:32 PM
Re: Timing with vacuum advance	73rrak	03/07/12 10:37 PM
Re: Timing with vacuum advance	05dakota	03/07/12 11:27 PM
Re: Timing with vacuum advance	DARTH V8Я	03/08/12 12:19 AM
Re: Timing with vacuum advance	73rrak	03/08/12 02:03 AM
Re: Timing with vacuum advance	RapidRobert	03/08/12 02:24 AM

Hop To