Mopar Actions Pumped Down attempt with PS hose leak

Print Thread

Re: Mopar Actions Pumped Down attempt with PS hose leak [Re: 68 Sat] #1186809 02/26/12 11:24 PM 02/26/12 11:24 PM
Joined: Feb 2012 Posts: 199 NC 1 1970A66 member
1970A66 member 1 Joined: Feb 2012 Posts: 199 NC	Quote: the two shims inside the pump were .028 and .030. I added .065...not great with math but I believe that puts me at .123. I followed the article as close as possible... In the original tech article they used the /6 valve assembly which had .077 total shim but in the Feb issue a reader wrote in and said he went up to .110 and it felt great so I wasn't sure how much to try. I don't want to be draining and pulling that valve assembly any more than necessary of course. Let me know how you like .123 Thanks.

Entire Thread
Subject	Posted By	Posted
Mopar Actions Pumped Down attempt with PS hose leak	68 Sat	02/27/12 02:06 AM
Re: Mopar Actions Pumped Down attempt with PS hose leak	68 Sat	02/27/12 02:07 AM
Re: Mopar Actions Pumped Down attempt with PS hose leak	68 Sat	02/27/12 02:07 AM
Re: Mopar Actions Pumped Down attempt with PS hose leak	68 Sat	02/27/12 02:09 AM
Re: Mopar Actions Pumped Down attempt with PS hose leak	68 Sat	02/27/12 02:11 AM
Re: Mopar Actions Pumped Down attempt with PS hose leak	1970A66	02/27/12 02:32 AM
Re: Mopar Actions Pumped Down attempt with PS hose leak	68 Sat	02/27/12 02:43 AM
Re: Mopar Actions Pumped Down attempt with PS hose leak	1970A66	02/27/12 03:24 AM
Re: Mopar Actions Pumped Down attempt with PS hose leak	autoxcuda	02/27/12 04:01 AM
Re: Mopar Actions Pumped Down attempt with PS hose leak	1970A66	03/03/12 01:06 AM

Hop To