360 rods in 318 block - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 360 rods in 318 block

Print Thread

Re: 360 rods in 318 block [Re: scratchnfotraction] #1181902 02/19/12 12:38 PM 02/19/12 12:38 PM
Joined: Dec 2003 Posts: 2,042 Leucadia, Ca. V vdriver top fuel
vdriver top fuel V Joined: Dec 2003 Posts: 2,042 Leucadia, Ca.	I've torn down 4 318's in the last 2 years, the oldest a late '72 casting from a '73 Valiant; the newest an '86 roller. They all had the heavier '645 (340/360) rods with pressed pins. The '72 bearing shells were dated late '72 so I'm sure it was a virgin motor.

Entire Thread
Subject	Posted By	Posted
360 rods in 318 block	gogo318	02/19/12 07:58 AM
Re: 360 rods in 318 block	340SHORTY	02/19/12 09:04 AM
Re: 360 rods in 318 block	BulletBob	02/19/12 10:15 AM
Re: 360 rods in 318 block	gogo318	02/20/12 02:54 AM
Re: 360 rods in 318 block	scratchnfotraction	02/20/12 03:20 AM
Re: 360 rods in 318 block	dogdays	02/20/12 05:44 AM
Re: 360 rods in 318 block	70AARcuda	02/20/12 06:51 AM
Re: 360 rods in 318 block	dogdays	02/20/12 05:22 PM
Re: 360 rods in 318 block	70Cuda383	02/19/12 02:15 PM
Re: 360 rods in 318 block	TheBlueBeast	02/19/12 02:52 PM
Re: 360 rods in 318 block	scratchnfotraction	02/19/12 03:41 PM
Re: 360 rods in 318 block	Supercuda	02/19/12 03:42 PM
Re: 360 rods in 318 block	TheBlueBeast	02/19/12 03:49 PM
Re: 360 rods in 318 block	scratchnfotraction	02/19/12 04:14 PM
Re: 360 rods in 318 block	vdriver	02/19/12 04:38 PM
Re: 360 rods in 318 block	TheBlueBeast	02/19/12 04:47 PM
Re: 360 rods in 318 block	HotRodDave	02/19/12 05:40 PM
Re: 360 rods in 318 block	RapidRobert	02/19/12 02:59 PM
Re: 360 rods in 318 block	Dusted_Ya	02/20/12 07:40 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1