340 Trans to Engine Block Supports

Print Thread

Re: 340 Trans to Engine Block Supports [Re: JAK] #1179271 02/17/12 11:35 PM 02/17/12 11:35 PM
Joined: Jul 2003 Posts: 6,167 Maryland GO_Fish master
GO_Fish master Joined: Jul 2003 Posts: 6,167 Maryland	Yes, it should have them, and on a 340, they should be the same parts as on any 318. 360 cars are not so clean cut. One side of the 360 is the same as 318/340 cars, but the other side (at least by 1974) changed and is very similar, but about 1" longer than 318-340 cars Scott B. "I'm a self-made man... I started with nothing, and I still have most of it!" 68 360 rusty B'cuda 'vert (GO Fish)13.59@ 98.72 mph 69 340 GTS stock 14.18@ 95.60 mph 01 5.9L Ram 1500 Quad Cab 4x4 01 3.5L 300M 16.23@ 86.97 mph

Entire Thread
Subject	Posted By	Posted
340 Trans to Engine Block Supports	JAK	02/16/12 02:15 PM
Re: 340 Trans to Engine Block Supports	sixpackbee	02/16/12 06:32 PM
Re: 340 Trans to Engine Block Supports	JohnRR	02/17/12 12:02 AM
Re: 340 Trans to Engine Block Supports	JAK	02/17/12 03:01 AM
Re: 340 Trans to Engine Block Supports	GO_Fish	02/18/12 03:35 AM

Hop To