Clean a aluminum intake with no bead blasting.!

Print Thread

Re: Clean a aluminum intake with no bead blasting.! [Re: 69440] #1167832 02/02/12 08:26 AM 02/02/12 08:26 AM
Joined: Jan 2003 Posts: 6,392 nielsville, minn. Q quickd100 master
quickd100 master Q Joined: Jan 2003 Posts: 6,392 nielsville, minn.	I use a weak Muratic acid solution and then rinse with water. I've tryed using clear acrylic enamel to seal them afterwards but have found that it tends to yellow out in time. Dave

Entire Thread
Subject	Posted By	Posted
Clean a aluminum intake with no bead blasting.!	67coronetman	01/29/12 08:34 PM
Re: Clean a aluminum intake with no bead blasting.!	Secret Chimp	01/29/12 08:43 PM
Re: Clean a aluminum intake with no bead blasting.!	JohnRR	01/29/12 10:02 PM
Re: Clean a aluminum intake with no bead blasting.!	Stroked_Hemi	01/29/12 10:07 PM
Re: Clean a aluminum intake with no bead blasting.!	None2Slow	01/29/12 10:08 PM
Re: Clean a aluminum intake with no bead blasting.!	Cab_Burge	01/30/12 12:45 AM
Re: Clean a aluminum intake with no bead blasting.!	tubedriver	01/30/12 02:01 AM
Re: Clean a aluminum intake with no bead blasting.!	rallye73	01/30/12 02:31 AM
Re: Clean a aluminum intake with no bead blasting.!	JohnRR	01/30/12 04:38 AM
Re: Clean a aluminum intake with no bead blasting.!	OzHemi	01/31/12 04:58 PM
Re: Clean a aluminum intake with no bead blasting.!	RapidRobert	01/30/12 04:48 AM
Re: Clean a aluminum intake with no bead blasting.!	dogdays	01/31/12 04:53 PM
Re: Clean a aluminum intake with no bead blasting.!	Mr.Yuck	01/31/12 04:58 PM
Re: Clean a aluminum intake with no bead blasting.!	Mr.Yuck	01/31/12 05:00 PM
Re: Clean a aluminum intake with no bead blasting.!	toplescuda	02/01/12 08:43 PM
Re: Clean a aluminum intake with no bead blasting.!	toplescuda	02/01/12 08:58 PM
Re: Clean a aluminum intake with no bead blasting.!	69440	02/02/12 03:44 AM
Re: Clean a aluminum intake with no bead blasting.!	quickd100	02/02/12 12:26 PM

Hop To