Quote:

Bill I have used 3 sets over the years and really like them but do yourself a favor and dummy them on the heads as soon as you can to see if they need some clearancing for the valve springs. Some guys send them back so T&D can do the work or you may lose the warranty if you do it yourself.


Thanks for the heads up, Terry is going to take care of that because the heads need to be cut anyways for tip alignment and height they appear that they will fit but would be too close for comfort so the intent is to use a smaller diameter spring to get a little more clearance, would be going from a 1.625 dia to a 1.550.


Light travels faster than the speed of sound,,,this is why some people seem bright untill you hear them speak.