Quote:

Stahl Headers will sell you a kit with flanges and bends,or a partially assebled kit that is tach welded and you do the final welding.
I would look there for starters,if he does not show what you are looking for,he will steer you in the right direction.
Keith



Yep give Stahl a call. I have built several sets of headers using his stuff. I always have him send me the flanges, collectors and what he calls a box of mistakes. It is basically a big b of rejected bends are cast aside during header production in their shop. There is nothing wrong with the bends, they are bends that were a few degrees off and did not fit in the jig so they couldn’t be used. They are cheaper than buying the U and J bends. there are enough bends in the box to build a complete set of headers. I have always had bends left over.