88 model, 3000 lbs. with 270 lb. driver, truck weight is 2720, 12 pt cage, W2 headed small block, 904 trans, 9" rear. Up front cut inner fenders out, cut hood braces off, remove hinges, remove metal under cowl, trim k member just like previous pictures from another poster, 2" lowering spindels, removed alot on core support, removed headlights and all hardware, remove hood latch, cut bottom half of frame rails (from bumper brackets to were roll bars attach), aftermarket steering colum, stock brakes, factory bumper, weld wheels, front runners, stock radiator. Cab mods, glass windshield, all others are lexan, doors gutted exceptlatch and latch handels, alum dash, one race seat, no headliner, no carpet, no factory dash. Rear, stock leaf springs, no tailgate, no bumper, weld wheels.