Thrust bearing/crank failure

Print Thread

Re: Thrust bearing/crank failure [Re: MR_P_BODY] #1148003 01/03/12 03:10 AM 01/03/12 03:10 AM
Joined: Jul 2005 Posts: 384 Australia M Mcode69 enthusiast
Mcode69 enthusiast M Joined: Jul 2005 Posts: 384 Australia	When you are putting it back together [with the wider bearing] file a chamfer on the parting line of one of the bearing shells to pressure feed oil from the bearing oil groove to the thrust surface, every little bit helps.

Entire Thread
Subject	Posted By	Posted
Thrust bearing/crank failure	74RALLYE	01/01/12 03:47 PM
Re: Thrust bearing/crank failure	RapidRobert	01/01/12 03:51 PM
Re: Thrust bearing/crank failure	mod5v	01/01/12 04:13 PM
Re: Thrust bearing/crank failure	THESHAKERPROJECT	01/01/12 05:56 PM
Re: Thrust bearing/crank failure	Cab_Burge	01/02/12 01:10 AM
Re: Thrust bearing/crank failure	74RALLYE	01/02/12 06:38 PM
Re: Thrust bearing/crank failure	JohnRR	01/02/12 10:04 PM
Re: Thrust bearing/crank failure	74RALLYE	01/02/12 11:42 PM
Re: Thrust bearing/crank failure	JohnRR	01/02/12 11:44 PM
Re: Thrust bearing/crank failure	74RALLYE	01/02/12 11:53 PM
Re: Thrust bearing/crank failure	JohnRR	01/03/12 12:22 AM
Re: Thrust bearing/crank failure	BLACKHEMIRR	01/03/12 01:18 AM
Re: Thrust bearing/crank failure	74RALLYE	01/03/12 01:48 AM
Re: Thrust bearing/crank failure	MR_P_BODY	01/03/12 02:20 AM
Re: Thrust bearing/crank failure	MR_P_BODY	01/03/12 02:31 AM
Re: Thrust bearing/crank failure	Mcode69	01/03/12 07:10 AM

Hop To