Interestinmg comments guys

I was leaning to the 1150, any recommendations on a decent carb builder as well ?

I don't have the flow spex on the heads as yet. So you guys think I can get away with 34 deg total with 50/50 mix?

Also with that cam, what would the rpm range be in a 572 Hemi and what convertor/gearing would suit with a 727 in an A body. Gearing is flexible !!

Lastly, would the Crower lifters last on the street with that cam/spring combo and do I need different lifters ie: Isky red zone ?

Thanx for the input fellas....