I purchased an AMD 72 Cuda front bumper and overall it's not a bad unit but it does pale in comparison to the original rear unit I had rechromed
There was a small indent that appears to have been there prior to chrome
https://board.moparts.org/ubbthreads/upload2/6828568-DSCF0606.JPG an original 1972 Cuda front bumper, note the contours of the lower edge and lack of holes:
https://board.moparts.org/ubbthreads/upload2/6830883-72frontbumper.jpgHere is a side by side showing the difference in contour and the holes in the AMD units lower edge (the OEM is on the bottom and is a 73) Notice the lack of chrome around the holes.
https://board.moparts.org/ubbthreads/upload2/6828549-DSCF0605.JPGThe area by the license plate was less prepped
https://board.moparts.org/ubbthreads/upload2/6828540-DSCF0603.JPGOEM unit had a fish hook shape at the lower curves, AMD did not. Note the rough edge too
https://board.moparts.org/ubbthreads/upload2/6828550-DSCF0604.JPG 
