Quote:

Question 1: Are the internals in a 360 magnum the same as the internals in a LA360? EXE: are the cams / pistons ect. interchangeable?

Question 2: I am on a tight budget and want to get the most bang for my buck i want to turbo it in the end but cant afford it all at once what are some of yalls HO 360 magnum builds?



Q1) yes and no. same bore, same crank casting, but slightly lighter rods with narrower small ends, different pistons with metric rings. but you can buy aftermarket pistons (say, KB107's) and put them in. cams are roller cams, flat tappet cams can be run with a change in pushrods, or the roller cam can be reground/replaced with another roller cam. roller lifters can be reused if in good shape.

the original 380HP crate motor wsa a standard truck magnum with different valve springs, cam, and single plane intake.

1976 Spinnaker White Plymouth Duster, /6 A833OD
1986 Silver/Twilight Blue Chrysler 5th Ave HotRod **SOLD!***
2011 Toxic Orange Dodge Charger R/T
2017 Grand Cherokee Overland
2014 Jeep Cherokee Latitude (holy crap, my daughter is driving)