Cutters for porting cast iron heads?

Print Thread

Re: Cutters for porting cast iron heads? [Re: wildcargo] #1105803 11/06/11 01:34 PM 11/06/11 01:34 PM
Joined: Dec 2008 Posts: 176 Rome, GA G GTXX member
GTXX member G Joined: Dec 2008 Posts: 176 Rome, GA	In the past I've bought a lot of 15-20 new assorted shape carbide burrs off of ebay for $20 or so. A couple were not straight but still usuable at low speed, overall it was a bargain.

Entire Thread
Subject	Posted By	Posted
Cutters for porting cast iron heads?	lahatte	11/02/11 04:58 AM
Re: Cutters for porting cast iron heads?	Cab_Burge	11/02/11 05:05 AM
Re: Cutters for porting cast iron heads?	dOc !	11/02/11 05:10 AM
Re: Cutters for porting cast iron heads?	dodgeboy11	11/02/11 05:33 AM
Re: Cutters for porting cast iron heads?	lahatte	11/02/11 05:55 AM
Re: Cutters for porting cast iron heads?	tubtar	11/02/11 02:26 PM
Re: Cutters for porting cast iron heads?	WILD BILL	11/02/11 03:17 PM
Re: Cutters for porting cast iron heads?	JohnRR	11/02/11 04:15 PM
Re: Cutters for porting cast iron heads?	MR_P_BODY	11/02/11 04:37 PM
Re: Cutters for porting cast iron heads?	mr_340	11/02/11 06:22 PM
Re: Cutters for porting cast iron heads?	lahatte	11/03/11 01:19 AM
Re: Cutters for porting cast iron heads?	SteveA	11/04/11 03:02 PM
Re: Cutters for porting cast iron heads?	Stanton	11/04/11 05:21 PM
Re: Cutters for porting cast iron heads?	Cab_Burge	11/05/11 05:00 AM
Re: Cutters for porting cast iron heads?	GTXX	11/05/11 05:28 AM
Re: Cutters for porting cast iron heads?	dodgeboy11	11/06/11 06:15 AM
Re: Cutters for porting cast iron heads?	wildcargo	11/06/11 03:28 PM
Re: Cutters for porting cast iron heads?	GTXX	11/06/11 05:34 PM
Re: Cutters for porting cast iron heads?	GTXX	11/05/11 05:46 AM
Re: Cutters for porting cast iron heads?	lahatte	11/05/11 06:16 AM
Re: Cutters for porting cast iron heads?	tubtar	11/05/11 05:34 PM
Re: Cutters for porting cast iron heads?	Twin Turbo Mower	11/02/11 05:23 AM

Hop To