Cam Recommendation for '71 340 rebuild

Print Thread

Cam Recommendation for '71 340 rebuild #1073075 09/11/11 02:03 PM 09/11/11 02:03 PM
Joined: Dec 2005 Posts: 62 Detroit, MI F FC7AARcuda OP member
FC7AARcuda OP member F Joined: Dec 2005 Posts: 62 Detroit, MI	I'm building a '71 340 'cuda that will mainly be stock except I want to upgrade the cam a bit. The engine will have KB 9.5:1 pistons, stock J heads, iron intake w/ TQ carb, and stock exhaust. 4 speed with 3.91 axle from the factory. I want a fairly smooth idle and good vacuum so nothing too extreme. The cams I'm considering are: 1. Mopar Purpleshaft P4452761AE 268-272 Duration .450"/.455" Lift 2. Comp Cam Xtreme XE256H 256-258 Duration .447"/.455" Lift 3. Comp Cam Xtreme XE262H 262-270 Duration .462"/.470" Lift 4. Lunati Voodoo 60401LK 256-262 Duration 454"/.475" Lift Anyone have experience with any of these cams, and if so would you recommend for what I'm building? Any other cam recommedations? Thanks

Entire Thread
Subject	Posted By	Posted
Cam Recommendation for '71 340 rebuild	FC7AARcuda	09/11/11 06:03 PM
Re: Cam Recommendation for '71 340 rebuild	zrxkawboy	09/11/11 08:23 PM
Re: Cam Recommendation for '71 340 rebuild	T2R9	09/11/11 08:53 PM
Re: Cam Recommendation for '71 340 rebuild	autoxcuda	09/11/11 09:11 PM
Re: Cam Recommendation for '71 340 rebuild	Dartcuda	09/12/11 01:45 AM
Re: Cam Recommendation for '71 340 rebuild	cdp	09/12/11 01:53 AM
Re: Cam Recommendation for '71 340 rebuild	Paul_Fancsali	09/13/11 08:07 PM

Hop To