Me and my son just bought this car for a project, it runs a drives well.

It was a 6 cylinder car, and the guy we bought it from put a 318 in it, and just made some solid mounts for the motor and used the 6 cylinder K member. It has drum brakes all the way around and no power brakes. The headers also hang 2-3 inches below the chassis, I don't think these are the correct headers for this car. As low as it sits it tends to scrap stuff occasionally while driving it. It also still has the 6 cylinder radiator, that will need upgraded as well.

A few questions, what is the most economical way to go to add the disc brakes.

Do all the headers for this car hang low like this one.

Where is the best place to get a radiator.

Will the 6 cylinder torsion bars have to be changed?

The rear has the adapters for the wheels, what do you have to do to change the bolt pattern to the 4.5, I guess is what these crager rims are?

The car has a good body, good paint, the interior is good, and it has everything for the air conditioning, we need to put the pump back on and build some lines, the condenser is on it, it was all hook up with the 6 cylinder.

Here is a picture, any advice or help would be great.



If this needs to be in another section please move it.

Thanks