Quote:

Quote:

One of the guys at diyautotune.com has a megasquirt on his slant 6. You could do it for pretty cheap if you threw an 80's/90's GM V6/V8 TBI throttle body onto a 2bbl slant 6 intake. Would just need to buy or make an adapter to get them to bolt together.



fuel distribution due to differing runner lengths is the slanty's biggest issue. I wouldn't go to EFI unless I went to MPI. I'd probably JY it, taking a setup off of a 3.8L GM and adapting it.



I have heard stories of guys picking up some good hp and mileage from going to port efi on a slant 6 because of poor fuel distribution on a stock intake. However if you just wanted an increase in driveability, a tbi system could be rigged up on the cheap.