everything is tack welded in place and need to be fully welded with motor/trans removed.

drivers side- welded a length of 2"x3" left over from home made frame connectors.



passenger side welded about a 9" length of leftover dakota frame-



removable trans mount, welded angle iron to the frame and trimmed down the 4speed trans cross member from an 80`s dodge truck. it looks like its welded to the frame but thats where i had to add some metal. i `m using the 4 speed for this build too.



i also need to make some support brackets for under the new motor mounting pads. but there it is leveled and offset 1" to the pass. side.