RHS heads and manifolds

Print Thread

Re: RHS heads and manifolds [Re: AdamR] #1025347 07/05/11 08:44 PM 07/05/11 08:44 PM
Joined: Jul 2003 Posts: 6,167 Maryland GO_Fish master
GO_Fish master Joined: Jul 2003 Posts: 6,167 Maryland	No, but that is a great shot that shows the mismatch at the bottom of the exhaust ports. I made some sheet metal adapters, outside dimensions traced off an LA port, inside dimensions traced off the Magnum port. I'm not sure if they helped or not. The driver side sealed properly with my adapters and parts store gasket, but the passenger side needed a Remflex gasket to seal. Scott B. "I'm a self-made man... I started with nothing, and I still have most of it!" 68 360 rusty B'cuda 'vert (GO Fish)13.59@ 98.72 mph 69 340 GTS stock 14.18@ 95.60 mph 01 5.9L Ram 1500 Quad Cab 4x4 01 3.5L 300M 16.23@ 86.97 mph

Hop To