Ring end gap - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Ring end gap

Print Thread

Ring end gap #1000428 05/26/11 07:19 PM 05/26/11 07:19 PM
Joined: Jan 2003 Posts: 3,623 Millinocket, Maine J JonC OP master
JonC OP master J Joined: Jan 2003 Posts: 3,623 Millinocket, Maine	I'm putting my 340 +.040 engine back together. What ring gap should I use? Cast pistons .040 over, Moly rings.

Entire Thread
Subject	Posted By	Posted
Ring end gap	JonC	05/26/11 11:19 PM
Re: Ring end gap	RapidRobert	05/27/11 12:01 AM
Re: Ring end gap	1_WILD_RT	05/27/11 12:13 AM
Re: Ring end gap	JonC	05/27/11 12:24 AM
Re: Ring end gap	RapidRobert	05/27/11 12:29 AM
Re: Ring end gap	1_WILD_RT	05/27/11 12:33 AM
Re: Ring end gap	Von	05/27/11 12:30 AM
Re: Ring end gap	RapidRobert	05/27/11 12:34 AM
Re: Ring end gap	JonC	05/27/11 12:50 AM
Re: Ring end gap	Dcuda69	05/27/11 01:27 AM
Re: Ring end gap	buildanother	05/27/11 01:57 AM
Re: Ring end gap	court9155	05/27/11 02:29 AM
Re: Ring end gap	court9155	05/27/11 04:39 AM
Re: Ring end gap	dOc !	05/27/11 04:58 AM
Re: Ring end gap	JonC	05/27/11 01:54 PM
Re: Ring end gap	MoparforLife	05/27/11 02:34 PM
Re: Ring end gap	Anonymous	05/27/11 04:20 PM
Re: Ring end gap	dOc !	05/27/11 04:32 PM
Re: Ring end gap	JonC	05/27/11 11:04 PM
Re: Ring end gap	RapidRobert	05/27/11 11:09 PM
Re: Ring end gap	JonC	05/28/11 12:57 AM

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1