Page 1 of 4 1 2 3 4 >
Topic Options
#267858 - 03/26/09 10:37 PM What Do YOU Want Howards Cams To Make For Mopars?
MrMoparRacing Offline
member

Registered: 06/16/06
Posts: 85
Loc: Wellington, Ohio (20 minutes f...
Howards Cams currently makes these items for
Small Block Mopar:
Hydraulic Flat Tappet Camshafts
Mechanical Flat Tappet Camshafts
Steel Billet Mechanical Roller Camshafts
Billet Timing Sets
Cam Correct
Hydraulic Lifters
Mechanical Lifters
“THE ORIGINAL” Direct Lube Solid Lifters
Mechanical Racing Roller Lifters (Vertical Bar)
Race Valve Springs, Retainers, Locks, Seals, Caps
Distributor Gears
Ultimate Duty Billet Connecting Rods


Big Block Mopar:
Hydraulic Flat Tappet Camshafts
Mechanical Flat Tappet Camshafts (3 Bolt)
Steel Billet Mechanical Roller Camshafts (3 Bolt)
Billet Timing Sets (singe & three bolt)
Cam Correct
Hydraulic Lifters
Mechanical Lifters
“THE ORIGINAL” Direct Lube Solid Lifters
Mechanical Racing Roller Lifters (Vertical Bar)
Race Valve Springs, Retainers, Locks, Seals, Caps
Distributor Gears

Howards Cams is wanting to know what MOPAR customers want Howards Cams to make that they currently do not offer. Rocker arms, crankshafts, connecting rods, pushrods, stroker pistons ect. Please be specific to exact sizes, such as rod length, stroke, piston bore, ect. Your input is highly valued!

Howards Cams products are MADE IN THE USA!

Howards Cams products are now available at Summit Racing Equipment!


Edited by MrMoparRacing (03/27/09 12:29 AM)
_________________________
Order your parts through me at Summit Racing Equipment, just call 1-800-230-3030 ext 6503 and ask for "Wilson".

Top
#267859 - 03/26/09 10:40 PM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing]
goldmember Offline
master

Registered: 02/16/04
Posts: 4501
Loc: Gainesville,FL
I like the cool box for storing cams.

Top
#267860 - 03/26/09 11:04 PM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: goldmember]
RemCharger Offline
master

Registered: 11/15/04
Posts: 2818
Loc: Sk. Canada
An "affordable" rocker setup for the max wedge victors. I bet they would sell like hotcakes. Well, as hotcakey as mopar can get anyways lol.
_________________________
67 Charger 383 122.5 mph.

Top
#267861 - 03/26/09 11:22 PM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing]
BCFKody Offline
member

Registered: 06/22/03
Posts: 154
Loc: Suburb of Chicago, IL
Hot Hydraulic roller cams and hydraulic roller lifters for big blocks and small blocks with stock displacements, and especially for hot street/strip stroker motors.

Top
#267862 - 03/26/09 11:50 PM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing]
Chris2581 Offline


Registered: 01/19/03
Posts: 6489
Loc: Jacksonville, FL
An affordable quality H-beam rod and 440 6pak style flat top pistons for 440 Mopar.The rods should be stock size(.990 pin OK)6.76 length,3.75 stroke,pistons in +.020,.030.040 and .060 oversizes from 4.320 standard bore.
_________________________
Nautilus Racing-
We use Superformance gaskets and Turbo Action converters/products.

Top
#267863 - 03/27/09 12:04 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: Chris2581]
RemCharger Offline
master

Registered: 11/15/04
Posts: 2818
Loc: Sk. Canada
Quote:

An affordable quality H-beam rod and 440 6pak style flat top pistons for 440 Mopar.The rods should be stock size(.990 pin OK)6.76 length,3.75 stroke,pistons in +.020,.030.040 and .060 oversizes from 4.320 standard bore.


Same with a 383. Lots of guys still building those. Just look in the Q&A every now and then.
_________________________
67 Charger 383 122.5 mph.

Top
#267864 - 03/27/09 12:10 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: RemCharger]
Chris2581 Offline


Registered: 01/19/03
Posts: 6489
Loc: Jacksonville, FL
Yes to the 383 parts also!! I should have mentioned those in my original post.
_________________________
Nautilus Racing-
We use Superformance gaskets and Turbo Action converters/products.

Top
#267865 - 03/27/09 02:14 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: Chris2581]
493_DART Offline


Registered: 07/11/04
Posts: 4297
Loc: ON A PREVOST
affordable ($3-400) rockers / alum and SS , in 1.6 AND 1.7 ratio .

Top
#267866 - 03/27/09 05:22 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: BCFKody]
StandOnIt Offline
super stock

Registered: 11/14/06
Posts: 1085
Loc: Baton Rouge, La.
Quote:

Hot Hydraulic roller cams and hydraulic roller lifters for big blocks and small blocks with stock displacements, and especially for hot street/strip stroker motors.




A good hyd roller for s/b strokers.
_________________________
76' Volare, 5.9 magnum w/Iron heads. New best 10.68 at 123 mph 1/4 mile.

Top
#267867 - 03/27/09 05:31 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing]
S/ST 3040 Offline
master

Registered: 07/14/06
Posts: 4595
Loc: On the south side of Nowhere
Add Mopar SB to their Pro-Max line of direct lube roller
lifters......and keep the prices sane.
_________________________


349" OEM Head, 1.88" valve, 9.24:1 Pump Gas
1.266 60 ft. 6.05 @ 111.36 9.66 @ 135.4 MPH (so far)
Non-Conformist

Top
#267868 - 03/27/09 06:03 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: S/ST 3040]
sickhemi Offline
enthusiast

Registered: 11/23/05
Posts: 210
Loc: mass,usa
W2 rockers affordable


Edited by sickhemi (03/27/09 06:04 AM)
_________________________
1968 gts 355 r3 six speed efi with irs in progress and 1969 convt 440 stage 6 efi 5spd dana

Top
#267869 - 03/27/09 06:41 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: sickhemi]
aarcuda Offline
I Live Here

Registered: 03/17/03
Posts: 15470
Loc: the boonies
TA rockers affordable. i really really want a set of the harland sharps but I cant afford to spend $1000 buck on the set.

Top
#267870 - 03/27/09 06:45 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: sickhemi]
patrick Offline
I Live Here

Registered: 01/20/03
Posts: 16102
Loc: Grand Haven, MI
I'd love a 4" strock SBM USA forged/USA machined crank in the same price range as their USA forged/USA machined SBC cranks, maybe a cast crank option in the $400 range if it was cast/machined in the USA.

I'd really, really love them to make their powderforged rods in SBM size, or at least 6.125" SBC, with the little end designed such that they could have a SBM pin size option without having to do a lot of spendy rework. those powderforged rods look like they'd be awesome for a street build up, or any application where you're looking at under 600HP or so.
_________________________
1976 Spinnaker White Plymouth Duster, /6 A833OD 1986 Silver/Twilight Blue Chrysler 5th Ave HotRod **SOLD!*** 2006 Inferno Red Dodge Caravan SXT 2011 Toxic Orange Dodge Charger R/T

Top
#267871 - 03/27/09 07:25 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: patrick]
1968RR Offline
top fuel

Registered: 11/10/05
Posts: 1801
Loc: San Angelo, Texas, U.S.A.
I just installed my new Howard's cam earlier this week (haven't fired yet).
Y'all have great customer service and great products. Keep up the good work.
_________________________
Proud owner of what is easily West Texas' 8th fastest 440-powered, Pontiac-blue, 1968 Road Runner with a cracked dash [fixed!] and a hole where the radio should be [also recently fixed!]

Top
#267872 - 03/27/09 08:51 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: 1968RR]
Blown61 Offline
pro stock

Registered: 02/18/03
Posts: 1559
Loc: wisconSIN
They move from Oshkosh?

Top
#267873 - 03/27/09 09:24 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: 1968RR]
maximum entropy Offline
master

Registered: 02/08/07
Posts: 5064
Loc: organ
rocker arms! offset for indy, victor, et cetera.
_________________________
for what is the good life if not doing things thoughtfully?

Top
#267874 - 03/27/09 10:42 AM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing]
sbdemon Offline
member

Registered: 01/21/03
Posts: 18
Loc: Sweden
W2/W5 rockers 1.6 1.7 ratio.

sbdemon

Top
#267875 - 03/27/09 04:08 PM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing]
Defbob Offline
master

Registered: 11/27/04
Posts: 3609
Loc: Norwich CT USA
Big Block

Forged Cranks: 4.25", 4.375, 4.5", 4.75" strokes, 2.2" x 2.009" wide rod journal on all, 2.75" mains, 8 bolt

Forged Crank: 3.375" stroke, 2.375" X 2.050 wide rod journal, 2.75" mains, 8 bolt

Billet Rods: 6.76" long, 2.375 journal, 1.014" width, .990 pin

Billet rods: 6.86" long, 2.375 journal, 1.014" width, .990 pin

_________________________
"Some Assembly Required"



70 Cutlass S Twin Turbo something...
44 Willys MB 5.3/Th350/Atlas 3.0

Top
#267876 - 03/27/09 04:30 PM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: MrMoparRacing]
BradH Offline
I Live Here

Registered: 01/30/03
Posts: 13020
Loc: Valhalla... eventually
If you offer a composite (not bronze) billet-cam compatible distributor drive gear for other brands (like Comp and Crane do), how about tooling one up for the Mopar crowd? Having to run a bronze gear on a street car is one of the things that's turned me off from switching to a solid roller in my 440.
_________________________
Living by the motto “It’s just easier to keep buying parts than bother with actually putting them together” since 2010… or was it 2000?

Top
#267877 - 03/27/09 05:08 PM Re: What Do YOU Want Howards Cams To Make For Mopars? [Re: sbdemon]
emarine01 Offline
master

Registered: 01/18/07
Posts: 3695
Loc: nc
Quote:

W2/W5 rockers 1.6 1.7 ratio.

sbdemon



Top
Page 1 of 4 1 2 3 4 >

Advertisement
Sponsored Link
Forum Stats
24,759 Registered Members
32 Forums
184,417 Topics
2,125,135 Posts

Most users ever online: 882 @ 03/05/17 10:15 PM
Moparts Newest Topics
1971 Plymouth roadrunner project - Wash DC area
by Vert
1 minute 36 seconds ago
TastyKake wear.. get ready for fall :)
by roadrunninMark
4 minutes 59 seconds ago
WIW NOS 440-6 decals 69 M code Road Runner
by FC7cuda
6 minutes 14 seconds ago
68 Belvedere 2 Door Post
by 65pacecar
45 minutes 5 seconds ago