Posted By: sparcy
book on rebuilding the 5.7 - 12/27/15 10:41 PM
is there a 5.7 3rd gen hemi rebuild book ?? i want to rebuild a 2004 5.7 to put in my 69 charger
Posted By: 72Swinger
Re: book on rebuilding the 5.7 - 12/27/15 11:42 PM
Service manual is best thing out there right now. They're not difficult they just have unique torque sequences with the factory fasteners. All the main,rod and headbolts are torque to yield and are supposed to be new at assembly.
Posted By: HotRodDave
Re: book on rebuilding the 5.7 - 12/29/15 07:08 PM
The timing chain is not just a normal dot to dot, make sure you get the right procedure for that.
Posted By: AlexP
Re: book on rebuilding the 5.7 - 01/04/16 05:28 PM
It's super easy stuff.
Ask away on questions or PM me and I'll shoot my phone number over.
Posted By: Dave_S
Re: book on rebuilding the 5.7 - 01/22/16 04:00 AM
This book is meant for machine shops and professional builders. I has some good info, although somewhat out dated.
http://www.enginebuildermag.com/wp-content/uploads/46568ChryslerHe_00000019776.pdf
Posted By: bonefish
Re: book on rebuilding the 5.7 - 01/22/16 05:20 AM
the book I would like to see is the one on performance up grades(hotrodding)for the 5.7