Vapor Return line routing 71 B-Body

I have a 71 Super Bee 383 4 speed.
Previous owner installed all new lines but made his own line from frame rail area up to passenger inner fender in 1/4" which is incorrect to mate with valve cover breather 5/16" nipple.
I purchased new line and it arrived today. Had to buy complete set because Fine Lines wouldn't sell just the short piece.
Will contact them tomorrow because it isn't formed correctly to reach top of inner fender well where it is clamped and bolted down.
Does anyone have a picture of said line???

*******The salesman sent me these pictures when we spoke and I received what is in the first picture not realizing that the second picture is different and looks to be what would reach upper inner fender.*******

I ordered RGL7104OM-71 Mopar B-body5/16" 2pcFuel Vapor Line
Thanks Ron

Day crew?

Good thread with pictures

https://board.moparts.org/ubbthreads/ubbthreads.php/topics/1363644/1.html

Page 3 on that link I posted

All the pictures towards the end of page 3

Yep forwarding all this info. to Nick at Fine Lines!!

Thanks very much
Ron