Moparts
Sure Grip ID please
Posted By:
shakerjoe
Sure Grip ID please -
06/20/18
02:34 AM
Like title says, need help ID'ng this unit, was told it's a 4.56 in good shape,thanks in advance.
Posted By:
shakerjoe
Re: Sure Grip ID please -
06/20/18
02:42 AM
1 more
Posted By:
UCUDANT
Re: Sure Grip ID please -
06/20/18
02:47 AM
Thats a clutch type. The gear ratio can usually be found on the outer section of the ring gear.
Example PIC's in this thread
Posted By:
shakerjoe
Re: Sure Grip ID please -
06/20/18
02:52 AM
Thought it might be, ty...found these #s on gear...
Posted By:
Supercuda
Re: Sure Grip ID please -
06/20/18
02:55 AM
Count the teeth and do the math
Posted By:
FC7cuda
Re: Sure Grip ID please -
06/20/18
03:06 AM
The ring gear teeth # and the pinion gear teeth # are on the ring gear, requires math. 44/9=4.88 gears
Posted By:
ruderunner
Re: Sure Grip ID please -
06/20/18
03:08 AM
44/9 = 4.88 ratio
Looks like a clutch type sure trip. 742 casting is large bearing straight shaft pinion.
The clutches can be replaced if worn.
Overall not a bad score if you need the stump puller gears.
Posted By:
shakerjoe
Re: Sure Grip ID please -
06/20/18
05:28 PM
Thanks for the answers, didn't realize it was that easy to tell the ratio, now that I know what it is I can list it, not going to use it, thanks again.
Posted By:
moparsquid
Re: Sure Grip ID please -
06/20/18
06:56 PM
nice I just picked up a whole rear 742 5-13 on a sweet deal not sure if I'm running it already have 4-30 in it
© 2024
Moparts Forums