Posted By: 71autoxr
8 3/4 axle bearing collar only?. - 02/21/16 01:12 AM
i am in need of a collar for a mopar 8 3/4 axle bearing, the part that is press fit to hold the bearing to the shaft. i have new bearings and every thing else i need. i am unable to locate just the collar. does it exist just by itself. i hate to have to buy another set of bearings just to get the collar. yes i have checked local auto parts stores, as well as several online sources. if anyone has a source or a part number i would appreciate it.
Posted By: RapidRobert
Re: 8 3/4 axle bearing collar only?. - 02/21/16 01:37 AM
Yes, Email the Doc (Doctor Diff that is)
Posted By: 71autoxr
Re: 8 3/4 axle bearing collar only?. - 02/23/16 06:18 AM
The doc is out on weekends and I was looking to source one local to finish a job. My Timken set originated from doc, and i buggered up the collar. An email and $10 I have a new one on the way. FWIW no one else can provide one, I believe I exhausted all options. Thanks all.
Posted By: JohnRR
Re: 8 3/4 axle bearing collar only?. - 02/23/16 04:40 PM
The bearings you bought should have came with new collars , every set I have ever bought did.
I have never seen the collars sold separately .
Posted By: jt4406
Re: 8 3/4 axle bearing collar only?. - 02/23/16 05:28 PM
Here's a link to one of my old posts about dana 60 axle bearings. (
https://board.moparts.org/ubbthreads/ubbt....html#Post12625 ) I bought a locking ring from A&W Bearing in Texas (
http://www.awbearings.com/ )back in 04, so I can't say if they are still available, or are available at all for a 8 &3/4. Good luck. Jess
Posted By: John_Kunkel
Re: 8 3/4 axle bearing collar only?. - 02/24/16 01:01 AM
Two numbers I have for the bearing collars are Timken K-108601 and BCA R-201047
