73 Roadrunner big block oil pan - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer 73 Roadrunner big block oil pan

Print Thread

73 Roadrunner big block oil pan #993781 05/16/11 07:43 PM 05/16/11 07:43 PM
Joined: May 2011 Posts: 340 Alaska 7 73rrak OP enthusiast
73rrak OP enthusiast 7 Joined: May 2011 Posts: 340 Alaska	I have a 73 Roadrunner factory small block car that I'm putting a 440 in with schumacker mounts and the factory small block K-frame. Does anybody have a picture of the oil pan that will work for this project ? I have a couple oil pans but I don't see any numbers on them.

Re: 73 Roadrunner big block oil pan [Re: 73rrak] #993782 05/16/11 09:21 PM 05/16/11 09:21 PM
Joined: Feb 2004 Posts: 7,195 Harrisburg, Pa. screamindriver master
screamindriver master Joined: Feb 2004 Posts: 7,195 Harrisburg, Pa.	Here's the thread in the tech archives/best of... link

Re: 73 Roadrunner big block oil pan [Re: screamindriver] #993783 05/16/11 10:55 PM 05/16/11 10:55 PM
Joined: Oct 2003 Posts: 3,698 NE Oklahoma V Von master
Von master V Joined: Oct 2003 Posts: 3,698 NE Oklahoma	I think (somebody chime in) that the chinese deep sump pans will fit the 73 k frames. 72 RR, Pump gas 440, 452s, 3800 lbs, Corked, ET Radials,. 11.33@117.72. Same car, bone stock 346s, 9.5 comp, baby solid. 12.24@110.

Re: 73 Roadrunner big block oil pan [Re: Von] #993784 05/17/11 12:19 AM 05/17/11 12:19 AM
Joined: May 2011 Posts: 340 Alaska 7 73rrak OP enthusiast
73rrak OP enthusiast 7 Joined: May 2011 Posts: 340 Alaska	One of the pans I have is almost the same as the 971 pan in the link but it has clearance for steering linkage on the back side of the sump but the sump looks like it's in the same location. The only markings it has is SS41-1 stamped in very small letters on the bottom of the pan. Will this pan work ?

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1