im looking to put a carbed 360 magnum into my 81 new yorker. i want to run a standard mechanical fuel pump and the old 360 front end accessories

where can i find a magnum cam with the fuel pump provision? im not looking for anything too much above stock

any after market roller cam with a long nose

you can use the extention ring from hughes on a short nose roller cam

i run a lunati voodoo roller cam with long nose,comp 901 springs

258/264
207/213
.485/.485

for a magnum, hughes springs and 2.2 retainers

maybe have your reground at bullit cams,cheap and bumps the stock cam up a little

hughes cam snout extender

if you want a lot more go with no sacrafice in idle quality, have Tim at Bullet Cams (www.bulletcams.com) regrind your cam using their HR259/316 lobe for both intake and exhaust, and run hughes #1110 springs with 2.2L retainers, or new retainers from hughes.