E-brock RPM heads + BB HP manifolds - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer E-brock RPM heads + BB HP manifolds

Print Thread

E-brock RPM heads + BB HP manifolds #933119 02/20/11 03:33 PM 02/20/11 03:33 PM
Joined: Sep 2005 Posts: 661 Iowa J jon01 OP mopar
jon01 OP mopar J Joined: Sep 2005 Posts: 661 Iowa	Will I be able to run HP manifolds with a set of angle plug RPM heads? I know headers will pick up a bunch with them but don't have the coin for a nice set of TTI's after building the rest of the drivetrain this winter... Thanks! 68 Charger R/T - #'s matching car, 499/727/3.91

Re: E-brock RPM heads + BB HP manifolds [Re: jon01] #933120 02/20/11 03:59 PM 02/20/11 03:59 PM
Joined: Jul 2010 Posts: 2,091 Delray beach, Florida P Performance Only top fuel
Performance Only top fuel P Joined: Jul 2010 Posts: 2,091 Delray beach, Florida	yes, no problem at all. i built a "B" engine combo for my brothers car with edelbrock heads and HP manifolds. it all works well together. machine shop owner and engine builder

Re: E-brock RPM heads + BB HP manifolds [Re: Performance Only] #933121 02/20/11 04:33 PM 02/20/11 04:33 PM
Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska	Quote: yes, no problem at all. Any prob w the plug boots live every 24 hour block of time like it's your last day on earth

Re: E-brock RPM heads + BB HP manifolds [Re: RapidRobert] #933122 02/20/11 04:34 PM 02/20/11 04:34 PM
Joined: Jul 2010 Posts: 2,091 Delray beach, Florida P Performance Only top fuel
Performance Only top fuel P Joined: Jul 2010 Posts: 2,091 Delray beach, Florida	none whatsoever with msd wires. machine shop owner and engine builder

Re: E-brock RPM heads + BB HP manifolds [Re: Performance Only] #933123 02/20/11 04:35 PM 02/20/11 04:35 PM
Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska R RapidRobert Circle Track
RapidRobert Circle Track R Joined: Nov 2003 Posts: 36,040 Lincoln Nebraska	that's good to hear live every 24 hour block of time like it's your last day on earth

Re: E-brock RPM heads + BB HP manifolds [Re: jon01] #933124 02/20/11 05:32 PM 02/20/11 05:32 PM
Joined: Jan 2003 Posts: 31,036 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 31,036 Oregon	Depends on the HP manifold casting. #7 boot will get really close on some manifolds. I did an article on this setup a few years ago. It is in the tech archives if you want to see some pictures.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1