Installing single leafs and CalTracs on a late "B" - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Installing single leafs and CalTracs on a late "B"

Print Thread

Page 2 of 2

1

2

Re: Installing single leafs and CalTracs on a late "B" [Re: mshred] #881422 12/17/10 06:04 PM 12/17/10 06:04 PM
Joined: Oct 2003 Posts: 7,506 Az Crizila OP master
Crizila OP master Joined: Oct 2003 Posts: 7,506 Az	Quote: This is cool! Got any more pics of the car? what combo and what does it run if you dont mind sharing Mild408,727, 9/14 diff w/4:10's. 11.72@115.38 to date. http://s79.photobucket.com/albums/j160/jcailey/?action=view&current=1180pass.mp4 Fastest 300

Re: Installing single leafs and CalTracs on a late "B" [Re: Crizila] #881423 12/17/10 06:17 PM 12/17/10 06:17 PM
Joined: Apr 2009 Posts: 3,415 Toronto M mshred master
mshred master M Joined: Apr 2009 Posts: 3,415 Toronto	Sweet

Re: Installing single leafs and CalTracs on a late "B" [Re: mshred] #881424 12/19/10 08:48 AM 12/19/10 08:48 AM
Joined: Oct 2006 Posts: 4,765 Q quick77rt Parts Problem
quick77rt Parts Problem Q Joined: Oct 2006 Posts: 4,765	Looks very good Caltracks and ss spring boxes work well for some, others it dont. 22 pounds off each side going with the std f-body caltrack/mono setup vs the SS boxes and multi leafs.. Did you have to make any spring adjustments, as in slide the front or rear seg one way or another?? I run a inch shorter wheel base in the rear/ 1/2 in the front and had to move the mono-s back seg one inch back to sit properly in the rear spring sliders. Cool your using the big mopar rear 6365922-DSC03471.JPG (662 downloads)

Re: Installing single leafs and CalTracs on a late "B" [Re: quick77rt ] #881425 12/20/10 09:41 PM 12/20/10 09:41 PM
Joined: Oct 2003 Posts: 7,506 Az Crizila OP master
Crizila OP master Joined: Oct 2003 Posts: 7,506 Az	Quote: Looks very good Caltracks and ss spring boxes work well for some, others it dont. 22 pounds off each side going with the std f-body caltrack/mono setup vs the SS boxes and multi leafs.. Did you have to make any spring adjustments, as in slide the front or rear seg one way or another?? I run a inch shorter wheel base in the rear/ 1/2 in the front and had to move the mono-s back seg one inch back to sit properly in the rear spring sliders. Cool your using the big mopar rear Used the stock front spring perches ( after I drilled them for the 5/8" bolts ) so my axle stayed in the same location. Both my stock multi-leaf springs and Calvert Mono springs had 22" front sections. 6368916-caltrac2.jpg (373 downloads) Fastest 300

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1